Dell PowerVault Storage Area Network Dell DR Series System Command Line Refere - Page 48
OS Windows Server 2008 R2 64-bit
![]() |
View all Dell PowerVault Storage Area Network manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Throughput 352581KiB/s Replicated At: 2012-06-20 09:08:00 File /1339632000/ddt_unique_2_thr6 Target IP 10.250.201.49 Target ID 6 Savings 13.10% Bytes 10585760 Throughput 352581KiB/s Replicated At: 2012-06-20 09:08:05 File /1339545600/ddt_unique Target IP 10.250.201.49 Target ID 6 Savings 10.50% Bytes 10885750 Throughput 77101KiB/s Replicated At: 2012-06-20 09:08:34 NOTE: This example intentionally only shows three of the 10 replicated files that were processed. ost --show [--clients] Description Displays any OST clients for the DR Series system. Syntax ost --show --clients Result Client acme-55 Plugin 2.0.0 OS Windows Server 2008 R2 64-bit Backup Software NetBackup 7.1.2012 Idle Time 00:01:10 Connections 1 Mode Dedupe NOTE: The displayed output when using the DR Series system CLI ost --show --clients command could indicate a fourth type of mode value. Depending upon the client, this value would normally display Auto, Dedupe, or Passthrough. However, you could potentially display a mode value of Mixed, which indicates that you had changed the mode using the DR Series system CLI while the client is still connected. NOTE: Be aware that the mode for clients that were connected to the OST media server before configuration changes might be different that what is shown in the displayed output when using the DR Series system CLI ost -show --clients command. The configuration changes will be updated and reflect any future connections. To verify the current state of an OST client, you can check these two sources: • DR Series system CLI, using the ost --show --clients command • DR Series system GUI, displaying the Clients page These sources display information about the connected and configured clients. For example, when a system is connected to multiple times, these sources show the number of connections to that client and the mode. You can also change the mode from dedupe to the other supported modes. When this is done the displayed mode will change, but any 48
![](/manual_guide/products/dell-powervault-dr4100-dell-dr-series-command-line-reference-guide-d0f78b0/48.png)