Dell PowerVault Storage Area Network Dell DR Series System Command Line Refere - Page 78
system --add_storage --enclosure <service tag>
View all Dell PowerVault Storage Area Network manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
For more information about enabling or disable marker detection settings on a DR Series system, see system --marker [-enable] or system --marker [--disable]. NOTE: To display the current status of the marker detection settings, use the DR Series system CLI command: system --show --marker. system --show --marker Marker Detection : Enabled system --marker [--disable] Description Disables the marker detection status for all supported backup software on a DR Series system. For example, the DR Series system supports specific versions of data management application (DMA) software like NetBackup version 6.5 and 7.1, Backup Exec 2010 and 2012, and Veeam 5.7 and 6.0. For a complete list of the supported DMAs, see the Dell DR Series System Interoperability Guide. Syntax system --marker --disable Result Successfully disabled system marker. system --marker [--enable] Description Enables the marker detection status for all supported backup software on a DR Series system. For example, the DR Series system supports specific versions of data management application (DMA) software like NetBackup version 6.5 and 7.1, Backup Exec 2010 and 2012, and Veeam 5.7 and 6.0. For a complete list of the supported DMAs, see the Dell DR Series System Interoperability Guide. Syntax system --marker --enable Result Successfully enabled system marker. system --add_storage --enclosure Description Adds a data storage expansion shelf (enclosure) to a DR Series system. Each expansion shelf that is added to a DR Series system requires a service tag for the enclosure, a license for each expansion shelf is required, and the DR Series system only allows two licenses per system (up to a total capacity of 27 Terabytes, which depends upon the size of the base system). NOTE: The 300 Gigabyte (GB) drive capacity (2.7 TB) version of the DR Series system does not support the addition of expansion shelf enclosures. For more information about the expansion shelf enclosure and its required licenses, see DR Series System Drive and System Capacities, system --show [--license] [--verbose] and system --license [--validate] [--add]. 78