Dell PowerVault Storage Area Network Dell DR Series System Command Line Refere - Page 40
Ethernet Channel Bonding Driver: v3.4.0 October 7, 2008
![]() |
View all Dell PowerVault Storage Area Network manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
network --troubleshoot [--links] [--gateway] [--ntp] [--dns] [--active_domain] [--nis] [-clients] [--port_mapper] [--network_config] [--show_active ] Isolates a variety of networking issues that you might encounter while running a DR Series system. When you can isolate a problem or issue to a specific cause, you can better understand and resolve it. The DR Series system CLI network --troubleshoot command and its options allow you to perform basic troubleshooting checks on the state of a DR Series system. Description NOTE: When entering the network --troubleshoot command string, the DR Series system checks and displays the current state for all of the --troubleshoot options. To limit the type of network troubleshooting check you want to display, define the command string to a specified check (or checks). For example, using network --troubleshoot -gateway, displays the status of the gateway for a DR Series system (for details, see network --troubleshoot [-gateway]). Syntax network --troubleshoot Result *** Checking link status for each interface bond0 : Link detected: yes eth0 : Link detected: yes eth1 : Link detected: yes eth2 : Link detected: yes eth3 : Link detected: yes lo : Link detected: yes *** Getting local IP addresses bond0 addr:10.25.20.23 Mask:255.255.245.0 *** Getting bond information Ethernet Channel Bonding Driver: v3.4.0 (October 7, 2008) Bonding Mode: transmit load balancing Primary Slave: None Currently Active Slave: eth0 MII Status: up MII Polling Interval (ms): 100 Up Delay (ms): 0 Down Delay (ms): 0 Slave Interface: eth0 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:50:56:93:59:7a Slave Interface: eth1 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:50:56:93:59:7b Slave Interface: eth2 MII Status: up Link Failure Count: 0 Permanent HW addr: 00:50:56:93:59:7c 40
![](/manual_guide/products/dell-powervault-dr4100-dell-dr-series-command-line-reference-guide-d0f78b0/40.png)