Dell PowerVault Storage Area Network Dell DR Series System Command Line Refere - Page 36
network --restart, network --setdhcp, network --setstatic_ip --ip <ip address> --netmask <
![]() |
View all Dell PowerVault Storage Area Network manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
eth1 Speed : 1000Mb/s eth1 Duplex : Full eth2 MAC : 00:50:56:93:5A:03 eth2 Max Speed : 1000baseT/Full eth2 Speed : 1000Mb/s eth2 Duplex : Full eth3 MAC : 00:50:56:93:5A:04 eth3 Max Speed : 1000baseT/Full eth3 Speed : 1000Mb/s eth3 Duplex : Full DNS Suffix : storage.local Primary Nameserver : 10.25.19.15 Secondary Nameserver : 10.25.19.16 network --restart Description Restarts the current networking configuration for a DR Series system. Syntax network --restart Result Shutting down interface eth0: Shutting down interface eth1: Shutting down interface eth2: Shutting down interface eth3: Shutting down loopback interface: Bringing up loopback interface: Bringing up interface bond0: Determining IP information for bond0... done. DNS Updated hostname: acme11.storage.local [ OK ] [ OK ] [ OK ] [ OK ] [ OK ] [ OK ] [ OK ] network --setdhcp Description Configures the DR Server system to use the dynamic host configuration protocol (DHCP) form of IP addressing. Syntax network --setdhcp Result Bond device operation successful. Please run 'network --restart' for the changes to take affect. network --setstatic_ip --ip --netmask --gateway Description Configures the DR Series system to use a static IP address (and/or configures the corresponding netmask and the routing gateway for a DR Series system). 36
![](/manual_guide/products/dell-powervault-dr4100-dell-dr-series-command-line-reference-guide-d0f78b0/36.png)