Dell Precision M4600 Owner's Manual (M4600) - Page 103
Installing The Non-Touchscreen Display Panel, display bezel, battery
View all Dell Precision M4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
10. Remove the display bracket. Installing The Non-Touchscreen Display Panel 1. Align the display bracket with the display panel and tighten the screws securing the display bracket in place. 2. Connect the digitizer cable. 3. Connect the low-voltage differential signaling (LVDS) cable to the back of the display panel and replace the adhesives securing the LVDS cable in place. 4. Tighten the screws securing the display panel in place. 5. Tighten the screws on the left side of the display panel securing the display panel in place. 6. Install the display bezel. 7. Install the battery. 8. Follow the procedures in After Working Inside Your Computer. 103
10.
Remove the display bracket.
Installing The Non-Touchscreen Display Panel
1.
Align the display bracket with the display panel and tighten the screws
securing the display bracket in place.
2.
Connect the digitizer cable.
3.
Connect the low-voltage differential signaling (LVDS) cable to the back of
the display panel and replace the adhesives securing the LVDS cable in
place.
4.
Tighten the screws securing the display panel in place.
5.
Tighten the screws on the left side of the display panel securing the display
panel in place.
6.
Install the
display bezel
.
7.
Install the
battery
.
8.
Follow the procedures in
After Working Inside Your Computer
.
103