Dell Precision M4600 Owner's Manual (M4600) - Page 70
Installing The Input/Output Board
View all Dell Precision M4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
11. Lift the right edge of the I/O board upwards to disengage the connector and remove from the system. Installing The Input/Output Board 1. Place the Input/Output (I/O) board on the system and ensure the connector is properly engaged to the matching connector on the system board. 2. Tighten the single screw securing the I/O board in place. 3. Connect the ExpressCard cable. 4. Install the palm rest. 5. Install the hard drive. 6. Install the optical drive. 7. Install the keyboard. 8. Install the keyboard trim. 9. Install the base cover. 10. Install the battery. 11. Follow the procedures in After Working Inside Your Computer. 70
11.
Lift the right edge of the I/O board upwards to disengage the connector and
remove from the system.
Installing The Input/Output Board
1.
Place the Input/Output (I/O) board on the system and ensure the connector
is properly engaged to the matching connector on the system board.
2.
Tighten the single screw securing the I/O board in place.
3.
Connect the ExpressCard cable.
4.
Install the
palm rest
.
5.
Install the
hard drive
.
6.
Install the
optical drive
.
7.
Install the
keyboard
.
8.
Install the
keyboard trim
.
9.
Install the
base cover
.
10.
Install the
battery
.
11.
Follow the procedures in
After Working Inside Your Computer
.
70