Dell Precision M6400 Service Manual - Page 16
Working on Your Computer: Dell Precision M6400 Service Manual, the network wall jack. - battery
View all Dell Precision M6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Working on Your Computer: Dell Precision M6400 Service Manual 1. Ensure that the work surface is flat and clean to prevent the computer cover from being scratched. 2. Shut down your computer. In Windows XP, click Start® Shutdown® Shutdown. In Windows Vista, click Start computer. , click the arrow icon, and then click Shut Down to turn off your NOTE: Ensure that the computer is off and not in a power management mode. If you cannot shut down the computer using the operating system, press and hold the power button for 4 seconds. 3. Disconnect your computer and all attached devices from their electrical outlets. NOTICE: To disconnect a network cable, first unplug the cable from your computer, and then unplug it from the network wall jack. 4. Disconnect any telephone or network cables from the computer. NOTICE: To help prevent damage to the system board, you must remove the battery from the battery bay before you service the computer. 5. Turn the computer upside down. 6. Slide the battery release latch and remove the battery. 1 battery 2 battery release latch 7. Disconnect any external devices and remove any cards before working on your computer: To remove a card, such as an ExpressCard, see the Dell™ Technology Guide at support.dell.com. To undock from a docking device, see the E-Port User's Guide or the E-Port Plus User's Guide at support.dell.com. file:///T|/htdocs/systems/wsm6400/en/sm/before.htm[11/16/2012 10:26:20 AM]