Dell Precision M6400 Service Manual - Page 68
Card Cage: Dell Precision M6400 Service Manual, Removing the Card Cage
View all Dell Precision M6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Card Cage: Dell Precision M6400 Service Manual Back to Contents Page Card Cage Dell Precision™ M6400 Service Manual Removing the Card Cage Replacing the Card Cage Removing the Card Cage CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 1. Follow the procedures in Before Working on Your Computer. 2. Remove the base assembly cover (see Removing the Base Assembly Cover). 3. Remove the secondary hard drive (see Removing the Secondary Hard Drive (HDD2)). 4. Remove the display assembly (see Removing the Edge-to-Edge Display or Removing the Display Assembly). 5. Remove the LED cover (see Removing the LED Cover). 6. Remove the keyboard (see Removing the Keyboard). 7. Remove the palm rest (see Removing the Palm Rest Assembly). 8. If a card is in the card cage, remove the card. 9. Disconnect the card cable from the I/O board. 10. Remove the four M2 x 3-mm screws. 11. Lift to remove the card cage. 1 M2 x 3-mm screws (4) 2 card cable 3 card cage file:///T|/htdocs/systems/wsm6400/en/sm/cardcage.htm[11/16/2012 10:27:21 AM]