Dell Precision M6400 Service Manual - Page 42
Edge-to-Edge Display: Dell Precision M6400 Service Manual, Removing the Edge-to-Edge Display - documentation
View all Dell Precision M6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Edge-to-Edge Display: Dell Precision M6400 Service Manual Back to Contents Page Edge-to-Edge Display Dell Precision™ M6400 Service Manual Removing the Edge-to-Edge Display Replacing the Edge-to-Edge Display Removing the Edge-to-Edge Display CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. NOTE: The color of your computer and certain computer components may appear differently than shown in this document. 1. Follow the instructions in Before Working on Your Computer. 2. Remove the base assembly cover (see Removing the Base Assembly Cover). 3. Where applicable, disconnect and unroute the antenna cables from the WLAN, WWAN, and WPAN cards. 4. Remove two M2.5 x 8-mm screws from the back of the base assembly and two M2.5 x 8-mm screws from the bottom of the base assembly. 1 M2.5 x 8-mm screws (2) (back of base assembly) 2 WPAN antenna cable 3 WLAN antenna cable 4 WWAN antenna cable 5 M2.5 x 8-mm screws (2) (bottom of base assembly) 5. Turn the computer topside up and open the display. 6. Remove the LED cover (see Removing the LED Cover). 7. Remove the keyboard (see Removing the Keyboard). 8. Remove the two M2.5 x 5-mm screws from the right hinge, and remove the two M2.5 x 5-mm screws from the left hinge. file:///T|/htdocs/systems/wsm6400/en/sm/display.htm[11/16/2012 10:26:51 AM]