Dell Precision M6400 Service Manual - Page 45

LED and CCFL Displays: Dell Precision M6400 Service Manual Back to Contents Page LED and CCFL Displays Dell Precision™ M6400 Service Manual Removing the Display Bezel Replacing the Display Bezel Removing the Display Panel Replacing the Display Panel Removing the Inverter Board (CCFL Display Only) Replacing the Inverter Board (CCFL Display Only) Removing the Microphone/Camera Board Replacing the Microphone/Camera Board Removing the Display Assembly Replacing the Display Assembly Removing the Display Cover Replacing the Display Cover Removing the Display Bezel CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. NOTICE: Removal of the bezel from the display requires extreme care to avoid damage to the bezel. NOTE: The color of your computer and certain computer components may appear differently than shown in this document. 1. Follow the instructions in Before Working on Your Computer. 2. Remove the two M2.5 x 5-mm screws along the bottom of the bezel. NOTE: Removing the bezel is a series of disengaging the tabs on the bezel from the display cover. 3. Starting at the bottom of the bezel, pull up in the middle, then pull in and up on the bottom right and bottom left. 4. On the left and right sides of the bezel, pull out and then lift. 5. Continue to lift the bezel up at an angle to remove the top of the bezel. file:///T|/htdocs/systems/wsm6400/en/sm/displayb.htm[11/16/2012 10:27:02 AM]