Dell Precision M6400 Service Manual - Page 51
Removing the Microphone/Camera Board, After Working on Your Computer, Removing the Display Bezel
View all Dell Precision M6400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
LED and CCFL Displays: Dell Precision M6400 Service Manual 5. Follow the procedures in After Working on Your Computer. Removing the Microphone/Camera Board CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. NOTE: Camera is optional and may not be included on your computer. 1. Follow the instructions in Before Working on Your Computer. 2. Remove the display bezel (see Removing the Display Bezel). 3. Disconnect the cable from the microphone/camera board. 4. Remove the two M2.5 x 5-mm screws, and remove the microphone/camera board. 1 display cover 2 microphone/camera board 3 cable connector 4 cable 5 M2.5 x 5-mm screws (2) Replacing the Microphone/Camera Board CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance. 1. Lift the cable out of the way and place the microphone/camera board in the display cover. 2. Connect the cable to the microphone/camera board. 3. Replace the two M2.5 x 5-mm screws. 4. Replace the display bezel (see Replacing the Display Bezel). file:///T|/htdocs/systems/wsm6400/en/sm/displayb.htm[11/16/2012 10:27:02 AM]