Dell S2815dn Smart Multifunction Printer CACStar Smart Card Reader Configurati - Page 27
Allow Telnet, Allow Non-Secure Port 8080, Disable Front Panel Configuration, SMB Disable NBSS, Allow
View all Dell S2815dn manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
These settings allow the admin to provide additional security by limiting CACStar admin access to specified IP addresses. If the Allow all IPs box is checked, an admin can access the CACStar configuration items from a PC at any IP address if he knows the ID and password. If it is not checked, the admin must access the CACStar configuration pages from the IP addresses specified for Administrator #1 or #2. These addresses must be on the same subnet as the CACStar. Allow Telnet If this is enabled CACStar will allow a Telnet session to occur. The Telnet session will happen over Port 23. Telnet use with CACStar is intended for diagnostics by the developers. Allow Non-Secure Port 8080 If this is enabled, CACStar will use Port 8080 and HTTP for HTML. Otherwise, Port 8443 and HTTPS will be used for HTML. Changing this setting requires a reboot of CACStar. Disable Front Panel Configuration If this is checked, CACStar will disable the Front Panel keyboard from changing the IP address, subnet mask, and gateway. Viewing of these settings on the front panel LCD will still be allowed. SMB Disable NBSS If this box is checked, CACStar will suppress NBSS traffic from the printer. This setting is only required when SMB/Kerberos Proxy is enabled and the local network does not allow NBSS traffic. CACStar User Guide Rev A27 Copyright 2017 Digital Imaging Technology Page 27