Dell S2815dn Smart Multifunction Printer CACStar Smart Card Reader Configurati - Page 5

Introduction CACStar™ provides a solution to HSPD-12 requirements for CAC/PIV based protection of network data to and from printers or Multifunction Devices (MFDs). You can configure it to require an authenticated CAC/ PIV card to control Copy, Print, Fax, Scan to Folder, Scan to Email, SNMP, or FTP. Configurable authentication methods include Basic X.509 certificate on the card, PIN validation, expiration, OCSP, root certificate, LDAP, and Kerberos. CACStar will adopt the IP address of the MFD on which it is installed, so there is no host network configuration change necessary. Configuration is easily done using secure web based access to CACStar by the network administrator. In its simplest form, the admin only needs to configure the IP address of the MFD and the IP address of the local time server. Information about many additional configuration options is described later in this guide. Prior to starting the CACStar configuration, you must know your network infrastructure. Appendix A has a convenient list of questions and the necessary data that you will need to collect. If you need help obtaining correct firmware or documentation, contact the Dell ProSupport Help Desk by calling 1-866-516-3115, or by sending email to [email protected]. This manual will guide you through installing the hardware, installing the software to convert the Dell S2815dn to be CACStar enabled, and configuration of the customer desired authentication control options. CACStar User Guide Rev A27 Copyright 2017 Digital Imaging Technology Page 5