Dell S3048-ON EMC Networking Virtualization Overlay with BGP EVPN - Page 52
Add distributed port groups, Create LACP LAGs
View all Dell S3048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
10.7 Add distributed port groups In this section, distributed port groups are created on the VDS. One port group is created for each VNI. To create the port groups: 1. In the vSphere Web Client, go to Home > Networking. 2. Right-click on Mgmt-VDS. Select Distributed Port Group > New Distributed Port Group. 3. On the Select name and location page, provide a name for the distributed port group to be associated with the first VNI configured on the leaf switches, e.g., VNI-1614-PG. Click Next. 4. On the Configure settings page, next to VLAN type: select VLAN. Next to VLAN ID, specify the VLAN associated with the first VNI on the leaf switches. In this example, VLAN 1614 is used. 5. Leave the remaining values at their defaults and click Next > Finish. 6. Complete steps 2 through 4 for the remaining VNIs, 1615 and 1616. When complete, the Navigator pane appears as shown: Distributed port groups created 10.8 Create LACP LAGs Since VLT port channels are configured on the leaf switches, LACP LAGs are configured on the VDS. To enable LACP on Mgmt-VDS: 1. In the vSphere Web Client, go to Home > Networking. 2. In the Navigator pane, select Mgmt-VDS. 3. In the center pane, select Configure > Settings > LACP. 4. Click the icon. The New Link Aggregation Group dialog box opens. a. Keep the default name, lag1. b. Set Number of ports equal to the number of physical uplinks on each ESXi host. In this deployment example, this number is set to 2. c. Set the Mode to Active. The remaining fields remain at their default values as shown in Figure 17. 52 Dell EMC Networking Virtualization Overlay with BGP EVPN