Dell S3048-ON EMC Networking Virtualization Overlay with BGP EVPN - Page 56
Connect VMs to VDS and port group
View all Dell S3048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
10.10 Connect VMs to VDS and port group In this example, VM network adapters are associated with the VDS and applicable port group. 1. Go to Home > Hosts and Clusters. 2. Right click on a VM, VM-1614-1 in this example, and select Edit Settings. 3. Next to Network adapter 1, select on the drop-down arrow and select Show more networks. 4. Select the applicable port group and VDS from the list. In this case, VNI-1614-PG on Mgmt-VDS is selected as shown: Port group and VDS selected 5. Click OK to make the selection. 6. In the Edit Settings window, Network adapter 1 appears as shown: Virtual wire on App-Tier network selected 7. Click OK to apply the setting. The network adapter on the VM is now connected to VLAN/VNI 1614. Repeat steps 2-7 for remaining VMs, placing them on the appropriate VLAN/VNI. 56 Dell EMC Networking Virtualization Overlay with BGP EVPN