Dell S4048-ON EMC PowerSwitch Installation Guide March 2021 - Page 10
Prerequisites
![]() |
View all Dell S4048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Table 1. S4048-ON LED behavior (continued) LED LOCATOR LED Table 2. Management Ethernet port LEDs LED Link LED Table 3. SFP+ port LEDs LED Link LED Activity LED Table 4. Default 1x40G mode QSFP+ port LEDs LED Link LED Activity LED Table 5. 4x10G mode QSFP+ port LEDs LED Link LED Activity LED Description ● Flashing amber-Power supply warning event; power continues to operate. ● Off-Locator function is disabled ● Flashing blue-Locator function is enabled Description ● Off-No Link ● Solid green-Link on 1 Gbps speed ● Solid yellow-Link on 10/100 Mbps speeds Description ● Off-No Link ● Solid green-Link on 10 Gbps speed ● Solid amber-Link on 1 Gbp speed ● Off-No Link ● Blinking green-Transmit/receive is active Description ● Off-No Link ● Solid green-Link operating at maximum speed-40 Gbps ● Solid amber-Link operating at lower speed-10 Gbps ● Flashing amber-one second on and one second off-port beacon ● Off-No Link ● Flashing green-Link activity at maximum speed-40 Gbps ● Flashing amber-Link activity at lower speed-10 Gbps Description ● Off-No Link ● Solid green-Link operating at 10 Gbps speed ● Solid amber-Link operating at lower 1 Gbps speed ● Off-No Link ● Flashing green-Link activity at 10 Gbps speed ● Flashing amber-Link activity at 1 Gbps speed Prerequisites The following is a list of components required for successful installation of the S4048-ON. NOTE: Detailed installation instructions for the S4048-ON are provided in Site Preparations and Install the S4048-ON. ● S4048-ON chassis or multiple chassis, if stacking ● AC country- and regional-specific cables to connect the AC power source to each of the chassis' AC power supplies 10 The S4048-ON switch
![](/manual_guide/products/dell-s4048on-emc-powerswitch-installation-guide-2021-dcde43f/10.png)