Dell S4048-ON EMC PowerSwitch Installation Guide March 2021 - Page 31
Fan module installation, Fan module replacement, After S4048–ON installation
![]() |
View all Dell S4048-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Fan module installation The fan modules in the S4048-ON are field replaceable. Module slot 1 is on the left side of the chassis, module slot 2 is in the middle of the chassis, and module slot 3 is on the right side of the chassis. CAUTION: DO NOT mix airflow directions. All fans must use the same airflow direction-reverse or normal. 1. Take the fan module out of the shipping box. 2. Use the grab handle to slide the module into the bay. Fan module replacement CAUTION: Complete steps 2 and 3 within one minute or the switch powers down. 1. Use the red-marked grab handle to slide the fan module out of the bay. 2. Use the red-marked grab handle on the replacement module to slide it into the bay. 3. Ensure that the module is secure. After S4048-ON installation After you have securely installed and powered on the S4048-ON, to configure your switch, see your open network installation environment (ONIE)-compatible operating system documentation at https://onie.org. Fans 31
![](/manual_guide/products/dell-s4048on-emc-powerswitch-installation-guide-2021-dcde43f/31.png)