Dell S5148F-ON EMC PowerSwitch Installation Guide July 2021 - Page 27

S5148F-ON switch installation, If you are using the fan trays or PSUs from the removed switch - firmware

Get Dell S5148F-ON PDF manuals and user guides View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

4. Remove the switch from the rack. At the same time, press in the two side-release bars on the switch and slide the switch forward. If you are using the fan trays or PSUs in the replacement switch, remove them from the switch. 5. Unpack the new switch. 6. Confirm that the software version of the replacement switch is the same as the previously installed switch. show os-version If the software versions do not match, upgrade the replacement switch software using the procedure included with the firmware download. 7. Copy the backed-up switch configuration to the new switch. copy tftp://hostip/filepath running-config 8. Install the new switch in your rack or cabinet. For detailed installation instructions, see S5148F-ON switch installation. If you are using the fan trays or PSUs from the removed switch, reinsert them in the replacement switch. 9. Connect all the cables. 10. Power on the switch. For more information, see Switch power up. S5148F-ON switch installation 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
4.
Remove the switch from the rack.
At the same time, press in the two side-release bars on the switch and slide the switch forward.
If you are using the fan trays or PSUs in the replacement switch, remove them from the switch.
5.
Unpack the new switch.
6.
Confirm that the software version of the replacement switch is the same as the previously installed switch.
show os-version
If the software versions do not match, upgrade the replacement switch software using the procedure included with the
firmware download.
7.
Copy the backed-up switch configuration to the new switch.
copy tftp://hostip/filepath running-config
8.
Install the new switch in your rack or cabinet.
For detailed installation instructions, see
S5148F-ON switch installation
.
If you are using the fan trays or PSUs from the removed switch, reinsert them in the replacement switch.
9.
Connect all the cables.
10.
Power on the switch.
For more information, see
Switch power up
.
S5148F-ON switch installation
27