Dell S5148F-ON EMC Networking OS10 Enterprise Edition Switch Configuration Gui - Page 27
S5148F-Leaf1A, S5148F-Leaf1B, VxRail node 1, VxRail node 2, VxRail node 3, VxRail node 4
View all Dell S5148F-ON manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
S5148F-Leaf1A no shutdown vlt-domain 127 backup destination 100.67.172.37 discovery-interface ethernet1/1/531/1/54 peer-routing end write memory S5148F-Leaf1B no shutdown vlt-domain 127 backup destination 100.67.172.38 discovery-interface ethernet1/1/531/1/54 peer-routing end write memory 7.2 Dual switch without VLT This example uses a four-node VxRail cluster connected to a switch pair without VLT as shown below. S5148F-Leaf1A 1/1/20 19 18 17 S5148F-Leaf1B 1/1/17 18 19 20 LACP VxRail node 1 VxRail node 2 VxRail node 3 25GbE connections 100GbE LACP connections, ports 1/1/53-54 Note: The jump box/DNS server, not shown, is connected to port 1/1/9 on each switch. VxRail node 4 Rack 1 Four-node cluster connected to a switch pair without VLT In this topology, an LACP port channel is used to connect the two switches. The commands in the following sections are run to complete the configuration of both switches. The port numbers used in the configuration commands correspond to those shown in Figure 15. Note: The commands in the tables below should be entered in the order shown. All commands are provided in the file attachments named S5148F-1A-no-vlt.txt and S5148F-1B-no-vlt.txt. 27 Dell EMC Networking OS10 Enterprise Edition Switch Configuration Guide for VxRail featuring S5248F-ON, S5232F-ON and S5148F-ON