Dell SP2009WFP Dell SP2009W Flat Panel Monitor - Page 26

Back to Contents Page Setting Up the Monitor Dell™ SP2009W Flat Panel Monitor User's Guide Attaching the Stand Connecting the Monitor Organizing Your Cables Attaching the Soundbar (optional) Removing the Stand Wall Mounting (Optional) Attaching the Base NOTE: The Base of the stand is detached when the monitor hipped from the factory. To attach the base of the stand: 1. Place the monitor on a flat surface. 2. Turn the screw to tighten the base. Connecting Your Monitor CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions. To connect your monitor to the computer: 1. Turn off your computer and disconnect the power cable. 2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same computer. Use both the cables only when they are connected to two different computers with appropriate video systems. Connecting the Blue VGA Cable