Dell U3219Q UltraSharp Monitor Users Guide - Page 56
Operating the monitor, NOTE: The message may be slightly different according to
![]() |
View all Dell U3219Q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
If either USB Type-C, DisplayPort, or HDMI input is selected and the corresponding cable is not connected, a floating dialog box as shown below appears. NOTE: The message may be slightly different according to the connected input signal. When the monitor is under DP/HDMI input and a USB Type-C cable is connected to a notebook that supports DP Alternate Mode, if Auto Select for USB-C is enabled, the following message appears: When Factory Reset is selected, the following message appears. When Yes is selected, the following message appears. 56 │ Operating the monitor
![](/manual_guide/products/dell-u3219q-ultrasharp-monitor-users-guide-8032f9a/56.png)
56± ±
│
±
±
Operating the monitor
If either USB Type-C, DisplayPort, or HDMI input is selected and the corresponding
cable is not connected, a floating dialog box as shown below appears.
NOTE: The message may be slightly different according to the
connected input signal.
When the monitor is under DP/HDMI input and a USB Type-C cable is connected to
a notebook that supports DP Alternate Mode, if
Auto Select for USB-C
is enabled,
the following message appears:
When
Factory Reset
is selected, the following message appears.
When
Yes
is selected, the following message appears.