Dell Vostro 14 3458 Dell Vostro 143458 Owners Manual - Page 12

Removing the Memory Module, Removing the WLAN Card, Before Working Inside Your Computer, battery

Get Dell Vostro 14 3458 PDF manuals and user guides View all Dell Vostro 14 3458 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 12 highlights

Removing the Memory Module 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. access panel 3. Pry the securing clips away from the memory module until it pops up. 4. Remove the memory module from its socket on the system board. Installing the Memory Module 1. Insert the memory module into the socket and press to lock the securing clips. 2. Install the access panel. 3. Install the battery. 4. Follow the procedures in After Working Inside Your computer. Removing the WLAN Card 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. access panel 3. Perform the following steps as shown in the illustration: a. Remove the screw that secures the WLAN card to the computer [1,2]. b. Remove the two connectors that secure the WLAN card to the system board [3]. c. Remove the WLAN card from its socket [4]. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Removing the Memory Module
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
access panel
3.
Pry the securing clips away from the memory module until it pops up.
4.
Remove the memory module from its socket on the system board.
Installing the Memory Module
1.
Insert the memory module into the socket and press to lock the securing clips.
2.
Install the
access panel
.
3.
Install the
battery
.
4.
Follow the procedures in
After Working Inside Your computer
.
Removing the WLAN Card
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
battery
b.
access panel
3.
Perform the following steps as shown in the illustration:
a.
Remove the screw that secures the WLAN card to the computer [1,2].
b.
Remove the two connectors that secure the WLAN card to the system board [3].
c.
Remove the WLAN card from its socket [4].
12