Dell Vostro 14 3458 Dell Vostro 143458 Owners Manual - Page 23
Installing the System Board, Removing the Power Connector
View all Dell Vostro 14 3458 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Installing the System Board 1. Install the system board into the chassis. 2. Tighten the screw to secure the system board to the computer. 3. Connect the power connector to the system board. 4. Connect the speaker cable to the system board. 5. Connect the LVDS cable to the system board. 6. Install: a. base cover b. keyboard c. memory module d. hard drive e. WLAN card f. access panel g. optical disk-drive h. battery 7. Follow the procedures in After Working Inside Your computer. Removing the Power Connector 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. battery b. optical disk-drive c. access panel d. hard drive e. memory module f. keyboard g. base cover h. system board 3. Disconnect the power connector from the system board and lift it away from the system board. 23