Dell Vostro 14 3458 Dell Vostro 143458 Owners Manual - Page 9

Installing the Battery, Removing the Optical Drive, Removing the Access Panel

Page 9 highlights

Installing the Battery 1. Insert the battery into the battery slot and press to lock in place. 2. Follow the procedures in After Working Inside Your computer. Removing the Optical Drive 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Perform the following steps as shown in the illustration: a. Remove the screw that secures the optical-disk drive (ODD) to the computer [1]. b. Press the tab indicated using a scribe [2]. c. Slide the ODD out of the computer [3]. Installing the Optical Drive 1. Slide the optical drive into the computer. 2. Tighten the screw to secure the optical drive. 3. Install the battery. 4. Follow the procedures in After Working Inside Your computer. Removing the Access Panel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the battery. 3. Perform the following steps as shown in the illustration: a. Remove the screws that secure the access panel to the computer [1]. b. Lift the access panel away from the computer [2]. 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48

Installing the Battery
1.
Insert the battery into the battery slot and press to lock in place.
2.
Follow the procedures in
After Working Inside Your computer
.
Removing the Optical Drive
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Perform the following steps as shown in the illustration:
a.
Remove the screw that secures the optical-disk drive (ODD) to the computer [1].
b.
Press the tab indicated using a scribe [2].
c.
Slide the ODD out of the computer [3].
Installing the Optical Drive
1.
Slide the optical drive into the computer.
2.
Tighten the screw to secure the optical drive.
3.
Install the
battery
.
4.
Follow the procedures in
After Working Inside Your computer
.
Removing the Access Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Perform the following steps as shown in the illustration:
a.
Remove the screws that secure the access panel to the computer [1].
b.
Lift the access panel away from the computer [2].
9