Dell Vostro 15 3546 Owners Manual - Page 19
Installing the Palmrest Assembly, Connect the touchpad and power cables to the system board.
View all Dell Vostro 15 3546 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
7. Perform the following steps as shown in the illustration: a. Gently pry up the palmrest from the computer [1]. b. Slide the palmrest from the computer [2]. Installing the Palmrest Assembly 1. Place the palmrest on the chassis and press the notches until it clicks in place. 2. Connect the touchpad and power cables to the system board. 3. Tighten the screws to secure it to the system board. 4. Turn the computer over and tighten the screws at the base of the computer. 5. Install: 19
7.
Perform the following steps as shown in the illustration:
a.
Gently pry up the palmrest from the computer [1].
b.
Slide the palmrest from the computer [2].
Installing the Palmrest Assembly
1.
Place the palmrest on the chassis and press the notches until it clicks in place.
2.
Connect the touchpad and power cables to the system board.
3.
Tighten the screws to secure it to the system board.
4.
Turn the computer over and tighten the screws at the base of the computer.
5.
Install:
19