Dell Vostro 15 3546 Owners Manual - Page 27
Installing the System Board, Removing the Display Assembly
View all Dell Vostro 15 3546 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Installing the System Board 1. Insert the system board into the chassis. 2. Connect the I/O board connector to the system board. 3. Connect the eDP cable to the system board. 4. Connect the speakers to the system board. 5. Connect the power connector to the system board. 6. Tighten the screws to secure the system board to the computer. 7. Install: a. palmrest assembly b. keyboard c. memory module d. hard drive e. WLAN card f. access panel g. optical disk-drive h. battery 8. Follow the procedures in After Working Inside Your computer. Removing the Display Assembly 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. Battery b. optical disk-drive c. access panel 27
Installing the System Board
1.
Insert the system board into the chassis.
2.
Connect the I/O board connector to the system board.
3.
Connect the eDP cable to the system board.
4.
Connect the speakers to the system board.
5.
Connect the power connector to the system board.
6.
Tighten the screws to secure the system board to the computer.
7.
Install:
a.
palmrest assembly
b.
keyboard
c.
memory module
d.
hard drive
e.
WLAN card
f.
access panel
g.
optical disk-drive
h.
battery
8.
Follow the procedures in
After Working Inside Your computer
.
Removing the Display Assembly
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
Battery
b.
optical disk-drive
c.
access panel
27