Dell Vostro 15 3546 Owners Manual - Page 24
Installing the Input/Output (I/O) Board, Removing the Speakers
View all Dell Vostro 15 3546 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Installing the Input/Output (I/O) Board 1. Insert the I/O board into the chassis. 2. Connect the I/O board cable to the system board. 3. Install: a. palmrest assembly b. keyboard c. memory module d. hard drive e. WLAN card f. access panel g. optical disk-drive h. battery 4. Follow the procedures in After Working Inside Your computer. Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: a. Battery. b. optical disk-drive. c. access panel. d. hard drive. e. memory module. f. keyboard. g. palmrest assembly. 3. Perform the following steps as shown in the illustration: a. Disconnect the speaker cables from the system board [1]. b. Release the speaker cables from the retention tabs [2]. 24
Installing the Input/Output (I/O) Board
1.
Insert the I/O board into the chassis.
2.
Connect the I/O board cable to the system board.
3.
Install:
a.
palmrest assembly
b.
keyboard
c.
memory module
d.
hard drive
e.
WLAN card
f.
access panel
g.
optical disk-drive
h.
battery
4.
Follow the procedures in
After Working Inside Your computer
.
Removing the Speakers
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
a.
Battery
.
b.
optical disk-drive
.
c.
access panel
.
d.
hard drive
.
e.
memory module
.
f.
keyboard
.
g.
palmrest assembly
.
3.
Perform the following steps as shown in the illustration:
a.
Disconnect the speaker cables from the system board [1].
b.
Release the speaker cables from the retention tabs [2].
24