Dell Vostro 5515 Vostro 15 5515 Service Manual - Page 25
Removing the 2280 solid-state drive from M.2 slot one
View all Dell Vostro 5515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
1. Align the notch on the 2230 solid-state drive with the tab on the solid-state drive slot. 2. Slide the 2230 solid-state drive firmly into the solid-state drive slot at an angle. 3. Align the screw hole on the solid-state drive with the screw hole on the palm-rest and keyboard assembly. 4. Replace the screw (M2x3) that secures the 2230 solid-state drive to the palm-rest and keyboard assembly. 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the 2280 solid-state drive from M.2 slot one 1. Follow the procedure in Before working inside your computer. NOTE: Solid-state drives are fragile. Exercise care when handling the solid-state drive. NOTE: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state. 2. Remove the base cover. NOTE: Depending on the configuration ordered, your computer may support a 2280 solid-state drive, or a 2230 solid-state drive in M.2 slot one. NOTE: This procedure applies only to computers shipped with a 2280 solid-state drive installed in M.2 slot one. The following image indicates the location of the 2280 solid-state drive that is installed in M.2 slot one and provides a visual representation of the removal procedure. Removing and installing components 25