Dell Vostro 5515 Vostro 15 5515 Service Manual - Page 39
Installing the network-port bracket
![]() |
View all Dell Vostro 5515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
1. Remove the two (M2x5) screws that secure the network-port bracket to the I/O board. 2. Lift the network-port bracket off the I/O board. Installing the network-port bracket If you are replacing a component, remove the existing component before performing the installation process. The following image(s) indicate the location of the network-port bracket and provide a visual representation of the installation procedure. 1. Place the network-port bracket on the I/O board. 2. Align the screw holes on the network-port bracket to the screw holes on the I/O board. Removing and installing components 39
![](/manual_guide/products/dell-vostro-5515-vostro-15-5515-service-manual-a2eecaf/39.png)
1.
Remove the two (M2x5) screws that secure the network-port bracket to the I/O board.
2.
Lift the network-port bracket off the I/O board.
Installing the network-port bracket
If you are replacing a component, remove the existing component before performing the installation process.
The following image(s) indicate the location of the network-port bracket and provide a visual representation of the installation
procedure.
1.
Place the network-port bracket on the I/O board.
2.
Align the screw holes on the network-port bracket to the screw holes on the I/O board.
Removing and installing components
39