Dell Vostro 5515 Vostro 15 5515 Service Manual - Page 59
Palm-rest and keyboard assembly
![]() |
View all Dell Vostro 5515 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
15. Close the right display hinge. 16. Replace the three (M2.5x4.5) screws that secure the right display-hinge to the palm-rest and keyboard assembly. 1. Install the heat sink. 2. Install the fan. 3. Install the wireless card. 4. Install the M.2 2280 solid-state drive or M.2 2230 solid-state drive in M.2 slot one, whichever applicable. 5. Install the M.2 2230 solid-state drive in M.2 slot two, if applicable. 6. Install the memory module. 7. Install the 3-cell battery or 4-cell battery, whichever applicable. 8. Install the base cover. 9. Follow the procedure in After working inside your computer. Palm-rest and keyboard assembly Removing the palm-rest and keyboard assembly 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. 3. Remove the 3-cell battery or 4-cell battery, whichever applicable. 4. Remove the memory module. 5. Remove the M.2 2280 solid-state drive or M.2 2230 solid-state drive from M.2 slot one, whichever applicable. 6. Remove the M.2 2230 solid-state drive from M.2 slot two, if applicable. 7. Remove the wireless card. 8. Remove the fan. 9. Remove the coin-cell battery. 10. Remove the I/O board. 11. Remove the system board. NOTE: The system board can be removed along with the heat sink. 12. Remove the power-button with optional fingerprint reader. 13. Remove the power-adapter port. 14. Remove the speakers. 15. Remove the touchpad. 16. Remove the display assembly. After performing the steps in the pre-requisites, you are left with the palm-rest and keyboard assembly. Removing and installing components 59
![](/manual_guide/products/dell-vostro-5515-vostro-15-5515-service-manual-a2eecaf/59.png)