Dell Vostro 5515 Vostro 15 5515 Service Manual - Page 41

Speakers, Removing the speakers

Get Dell Vostro 5515 PDF manuals and user guides View all Dell Vostro 5515 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

1. Slide the I/O board into the slots on the palm-rest and keyboard assembly. 2. Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly. 3. Replace the screw (M2x2) that secures the I/O board to the palm-rest and keyboard assembly. 4. Connect the power-button with optional fingerprint reader cable into the connector on the I/O board and close the latch to secure the cable. 5. Connect the coin-cell battery cable to the I/O board. 6. Connect the I/O-board cable to the I/O board and close the latch to secure the cable. 7. Adhere the tape that secures the I/O-board cable to the I/O board. 8. Close the left display hinge. 9. Replace the three (M2.5x4.5) screws that secure the left display hinge to the palm-rest and keyboard assembly. 1. Install the network-port bracket. 2. Install the base cover. 3. Follow the procedure in After working inside your computer. Speakers Removing the speakers 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. The following images indicate the location of the speakers and provide a visual representation of the removal procedure. Removing and installing components 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
1.
Slide the I/O board into the slots on the palm-rest and keyboard assembly.
2.
Align the screw hole on the I/O board with the screw hole on the palm-rest and keyboard assembly.
3.
Replace the screw (M2x2) that secures the I/O board to the palm-rest and keyboard assembly.
4.
Connect the power-button with optional fingerprint reader cable into the connector on the I/O board and close the latch to
secure the cable.
5.
Connect the coin-cell battery cable to the I/O board.
6.
Connect the I/O-board cable to the I/O board and close the latch to secure the cable.
7.
Adhere the tape that secures the I/O-board cable to the I/O board.
8.
Close the left display hinge.
9.
Replace the three (M2.5x4.5) screws that secure the left display hinge to the palm-rest and keyboard assembly.
1.
Install the
network-port bracket
.
2.
Install the
base cover
.
3.
Follow the procedure in
After working inside your computer
.
Speakers
Removing the speakers
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
The following images indicate the location of the speakers and provide a visual representation of the removal procedure.
Removing and installing components
41