Dell Vostro 5625 Service Manual - Page 26
Removing the M.2 2280 solid-state drive, Next steps, Prerequisites, About this task
View all Dell Vostro 5625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. Align the notch on the M.2 2230 solid-state drive with the tab on the solid-state drive slot. 4. Slide the M.2 2230 solid-state drive into the solid-state drive slot. 5. Replace the screw (M2x3) that secures the M.2 mounting bracket to the palm-rest and keyboard assembly. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing the M.2 2280 solid-state drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task NOTE: This procedure applies only to computers shipped with an M.2 2280 solid-state drive installed. NOTE: The M.2 solid-state drive installed on your computer depends on the configuration ordered. The M.2 slot supports one of the following solid-state drives: ● M.2 2230 solid-state drive A mounting bracket for the M.2 2230 solid-state drive is required. The mounting bracket is provided if the M.2 2230 solid-state drive is shipped with the computer. If you are replacing the M.2 2230 solid-state drive with a new M.2 2230 solid-state drive, use the existing mounting bracket to install the latter. ● M.2 2280 solid-state drive If you are replacing the M.2 2280 solid-state drive (shipped with the computer) with an M.2 2230 solid-state drive, a mounting bracket for the M.2 2230 solid-state drive is required. Please contact Dell support to purchase the mounting bracket for the M.2 2230 solid-state drive. The following image(s) indicate the location of the M.2 2280 solid-state drive and provides a visual representation of the removal procedure. 26 Removing and installing components