Dell Vostro 5625 Service Manual - Page 47
Connect the keyboard backlit cable and close the latch of the keyboard backlit connector on the system board.
![]() |
View all Dell Vostro 5625 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Steps 1. Using the alignment posts, place the left and right speakers on the palm-rest and keyboard assembly. 2. Route the speaker cable through the routing guides on the palm-rest and keyboard assembly. 3. Adhere the tapes that secure the speaker cable to the palm-rest and keyboard assembly. 4. Connect the touchpad cable and close the latch of the touchpad connector on the system board. 5. Connect the keyboard cable and close the latch of the keyboard connector on the system board. 6. Connect the keyboard backlit cable and close the latch of the keyboard backlit connector on the system board. Next steps 1. Install the base cover. 2. Follow the procedure in After working inside your computer. Removing and installing components 47
![](/manual_guide/products/dell-vostro-5625-service-manual-d0b5642/47.png)
Steps
1.
Using the alignment posts, place the left and right speakers on the palm-rest and keyboard assembly.
2.
Route the speaker cable through the routing guides on the palm-rest and keyboard assembly.
3.
Adhere the tapes that secure the speaker cable to the palm-rest and keyboard assembly.
4.
Connect the touchpad cable and close the latch of the touchpad connector on the system board.
5.
Connect the keyboard cable and close the latch of the keyboard connector on the system board.
6.
Connect the keyboard backlit cable and close the latch of the keyboard backlit connector on the system board.
Next steps
1.
Install the
base cover
.
2.
Follow the procedure in
After working inside your computer
.
Removing and installing components
47