Dell Vostro 5625 Service Manual - Page 52

Power button with optional fingerprint reader

Get Dell Vostro 5625 PDF manuals and user guides View all Dell Vostro 5625 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

12. Replace the two screws (M2x4) that secure the Type-C port-bracket to the system board. 13. Connect the power-adapter port cable to the system board and replace the adhesive tape on the cable. 14. Connect the display cable to the system board, close the latch of the display cable connector and replace the clear adhesive tape on the display cable connector. 15. Close the right display hinge and align the screw holes on the right display hinge with the screw holes on the system board. 16. Replace the three screws (M2.5x5) that secure the right display hinge to the palm-rest and keyboard assembly. Next steps 1. Install the heatsink. 2. Install the wireless card. 3. Install the M.2 2230 solid-state drive or M.2 2280 solid-state drive, whichever is applicable. 4. Install the memory module. 5. Install the base cover. 6. Follow the procedure in After working inside your computer. Power button with optional fingerprint reader Removing the power button with optional fingerprint reader Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the base cover. About this task The following image(s) indicate the location of the power button and provides a visual representation of the removal procedure. Steps 1. Peel the adhesive tape that secures the power-button cable. 52 Removing and installing components

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
12.
Replace the two screws (M2x4) that secure the Type-C port-bracket to the system board.
13.
Connect the power-adapter port cable to the system board and replace the adhesive tape on the cable.
14.
Connect the display cable to the system board, close the latch of the display cable connector and replace the clear adhesive
tape on the display cable connector.
15.
Close the right display hinge and align the screw holes on the right display hinge with the screw holes on the system board.
16.
Replace the three screws (M2.5x5) that secure the right display hinge to the palm-rest and keyboard assembly.
Next steps
1.
Install the
heatsink
.
2.
Install the
wireless card
.
3.
Install the
M.2 2230 solid-state drive
or
M.2 2280 solid-state drive
, whichever is applicable.
4.
Install the
memory module
.
5.
Install the
base cover
.
6.
Follow the procedure in
After working inside your computer
.
Power button with optional fingerprint reader
Removing the power button with optional fingerprint reader
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
base cover
.
About this task
The following image(s) indicate the location of the power button and provides a visual representation of the removal procedure.
Steps
1.
Peel the adhesive tape that secures the power-button cable.
52
Removing and installing components