Dell W-Series 207 Instant 6.4.3.1-4.2 User Guide - Page 109
Configuration Parameters for WLAN Security Settings in an Employee or Voice Network, Table 22
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Table 22: Configuration Parameters for WLAN Security Settings in an Employee or Voice Network Parameter Description Security Level Type Blacklisting To enable blacklisting of the clients with a specific number of authentication failures, select Enabled from the Blacklisting drop-down list and specify a value for Max authentication failures. The users who fail to authenticate the number of times specified in Max authentication failures field are dynamically blacklisted. Enterprise , Personal, and Open security levels. Accounting Select any of the following options: l To enable accounting, select Use authentication servers from the Accounting drop-down list. On enabling the accounting function, APs post accounting information to the RADIUS server at the specified Accounting interval. l To use a separate server for accounting, select Use separate servers. The accounting server is distinguished from the authentication server specified for the SSID profile. l To disable the accounting function, choose Disabled. Enterprise , Personal, and Open security levels. Authentication survivability To enable authentication survivability, set Authentication survivability to Enabled. Specify a value in hours for Cache timeout (global) to set the duration after which the authenticated credentials in the cache must expire. When the cache expires, the clients are required to authenticate again. You can specify a value within a range of 1 to 99 hours and the default value is 24 hours. NOTE: The authentication survivability feature requires ClearPass Policy Manager 6.0.2 or later, and is available only when the New server option is selected authentication. On setting this parameter to Enabled, Instant authenticates the previously connected clients using EAP-PEAP authentication even when connectivity to ClearPass Policy Manager is temporarily lost. The Authentication survivability feature is not applicable when a RADIUS server is configured as an internal server. Enterprise security level MAC authentication To enable MAC address based authentication for Personal and Open security levels, set MAC authentication to Enabled. For Enterprise security level, the following options are available: l Perform MAC authentication before 802.1X-Select this checkbox to use 802.1X authentication only when the MAC authentication is successful. l MAC authentication fail-thru-On selecting this checkbox, the 802.1X authentication is attempted when the MAC authentication fails. Enterprise , Personal, and Open security levels. Delimiter character Specify a character ( for example, colon or dash) as a delimiter for the MAC address string. When configured, the W-IAP will use the delimiter in the MAC authentication request. For example, if you specify the colon as a delimiter, MAC addresses in the xx:xx:xx:xx:xx:xx format are used. If the delimiter is not specified, the MAC address in the xxxxxxxxxxxx format is used. NOTE: This option is available only when MAC authentication is enabled. Enterprise , Personal, and Open security levels. Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Wireless Network Profiles | 109