Dell W-Series 207 Instant 6.4.3.1-4.2 User Guide - Page 383
AP Connected Switch Configuration
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 383 highlights
Table 75: W-IAP Configuration for Scenario 1-IPSec: Single Datacenter Deployment with No Redundancy Configuration Steps CLI Commands UI Procedure authentication servers and access rules created above and enable authentication survivability. (ap)(config) # wired-port-profile wired-port (ap)(wired-port-profile "wired-port")# switchportmode access (ap)(wired-port-profile "wired-port")# allowed-vlan all (ap)(wired-port-profile "wired-port")# native-vlan 20 (ap)(wired-port-profile "wired-port")# no shutdown (ap)(wired-port-profile "wired-port")# access-rulename wired-port (ap)(wired-port-profile "wired-port")# type employee (ap)(wired-port-profile "wired-port")# auth-server server1 (ap)(wired-port-profile "wired-port")# auth-server server2 (ap)(wired-port-profile "wired-port")# dot1x (ap)(wired-port-profile "wired-port")# exit (ap)(config)# enet1-port-profile wired-port Wired Profile and Wireless Network Profiles 7. Create access rule for wired and wireless authentication. In this example, the rule permits all traffic. Configure a wireless SSID to operate in L3 mode and associate distributed L3 mode VLAN 30 to the WLAN SSID profile. (ap)(config) # wlan ssid-profile wireless-ssid (ap)(SSID Profile "wireless-ssidt")# enable (ap)(SSID Profile "wireless-ssid")# type employee (ap)(SSID Profile "wireless-ssid")# essid wirelessssid (ap)(SSID Profile "wireless-ssid")# opmode wpa2-aes (ap)(SSID Profile "wireless-ssid")# vlan 30 (ap)(SSID Profile "wireless-ssid")# auth-server server1 (ap)(SSID Profile "wireless-ssid")# auth-server server2 (ap)(SSID Profile "wireless-ssid")# authsurvivability For wired profile: (ap)(config)# wlan access-rule wired-port (ap)(Access Rule "wired-port")# rule any any match any any any permit For WLAN SSID: (ap)(config)# wlan access-rule wireless-ssid (ap)(Access Rule "wireless-ssid")# rule any any match any any any permit See Configuring ACL Rules for Network Services NOTE: Ensure that you execute the commit apply command in the Instant CLI before saving the configuration and propagating changes across the W-IAP cluster. AP Connected Switch Configuration Client VLANs defined in this example must be opened on the upstream switches in multi AP deployments, as client traffic from slave to master is tagged with the client VLAN. 383 | IAP-VPN Deployment Scenarios Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide