Dell W-Series 207 Instant 6.4.3.1-4.2 User Guide - Page 197
Table 38, Inbound Firewall Rules - New Rule Window
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Figure 43 Inbound Firewall Rules - New Rule Window 3. Configure the following parameters: Table 38: Inbound Firewall Rule Configuration Parameters Parameter Description Action Select any of following actions: l Select Allow to allow access users based on the access rule. l Select Deny to deny access to users based on the access rule. l Select Destination-NAT to allow changes to destination IP address. l Select Source-NAT to allow changes to the source IP address. The destination-nat and source-nat actions apply only to the network services rules. Service Select a service from the list of available services. You can allow or deny access to any or all of the following services based on your requirement: l any-Access is allowed or denied to all services. l custom-Available options are TCP, UDP, and Other. If you select the TCP or UDP options, enter appropriate port numbers. If the Other option is selected, ensure enter the appropriate ID is entered. Source Select any of the following options: l from all sources- Traffic from all sources is either allowed, denied, or the IP address is translated at the source or destination as defined in the rule. l from a host-Traffic from a particular host is either allowed, denied, or the IP address is translated at the source or destination as defined in the rule. After selecting this option, specify the IP address of the host. l from a network-Traffic from a particular network is either allowed, denied, or the IP address is translated at the source or destination as defined in the rule. After selecting this option, specify the IP address and netmask of the source network. Destination Select a destination option for the access rules for network services, applications, and application categories. You can allow or deny access to any the following destinations based on your requirements. l to all destinations- Traffic for all destinations is allowed, denied, or the IP address is translated at the source or destination as defined in the rule. l to a particular server-Traffic to a specific server is allowed, denied, or the IP address is translated at the source or destination as defined in the rule. After selecting this option, specify the IP address of the destination server. l except to a particular server-Access is allowed or denied to servers other than the specified server. After selecting this option, specify the IP address of the destination Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Roles and Policies | 197