Dell W-Series 207 Instant 6.4.3.1-4.2 User Guide - Page 121
In the CLI, Configuring Security Settings for a Wired Profile, In the Instant UI
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
l Specify the Allowed VLAN, enter a list of comma separated digits or ranges 1,2,5 or 1-4, or all. The Allowed VLAN refers to the VLANs carried by the port in Access mode. l If the Client IP Assignment is set to Network Assigned, specify a value for Native VLAN. A VLAN that does not have a VLAN ID tag in the frames is referred to as Native VLAN. You can specify a value within the range of 1-4093. d. If the Access mode is selected: l If the Client IP Assignment is set to Virtual Controller Assigned, proceed to step 2. l If the Client IP Assignment is set to Network Assigned, specify a value for Access VLAN to indicate the VLAN carried by the port in the Access mode. 2. Click Next. The Security tab details are displayed. 3. Configure security settings for the wired profile. For more information, see Configuring Security Settings for a Wired Profile on page 121. In the CLI To configure VLAN settings for a wired profile: (Instant AP)(config)# wired-port-profile (Instant AP)(wired ap profile )# switchport-mode {trunk|access} (Instant AP)(wired ap profile )# allowed-vlan (Instant AP)(wired ap profile )# native-vlan {} (Instant AP)(wired ap profile )# end (Instant AP)# commit apply To configure a new VLAN assignment rule: (Instant AP)(config)# wired-port-profile (Instant AP)(wired ap profile )# set-vlan {equals| not-equals| starts-with| ends-with| contains| matches-regular-expression} | value-of} (Instant AP)(wired ap profile )# end (Instant AP)# commit apply Configuring Security Settings for a Wired Profile If you are creating a new wired profile, complete the Wired Settings and VLAN procedures before specifying security settings. For more information, see Configuring Wired Settings on page 119 and Configuring VLAN Settings for a WLAN SSID Profile on page 102. Configuring Security Settings for a Wired Employee Network You can configure security parameters for an employee network by using the Instant UI or CLI. In the Instant UI To configure security parameters for an employee network: 1. Configure the following parameters in the Security tab. l MAC authentication-To enable MAC authentication, select Enabled. The MAC authentication is disabled by default. l 802.1X authentication-To enable 802.1X authentication, select Enabled. l MAC authentication fail-thru-To enable authentication fail-thru, select Enabled. When this feature is enabled, 802.1X authentication is attempted when MAC authentication fails. The MAC authentication fail-thru checkbox is displayed only when both MAC authentication and 802.1X authentication are Enabled. l Select any of the following options for Authentication server 1: Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Wired Profiles | 121