Dell W-Series 207 Instant 6.4.3.1-4.2 User Guide - Page 268
Finish, Domain Name
![]() |
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 268 highlights
Table 53: Access Rule Configuration Parameters Service Category Description l Select Destination-NAT to allow changes to destination IP address. l Select Source-NAT to allow changes to the source IP address. The destination-nat and source-nat actions apply only to the network services rules. Destination Select a destination option for the access rules for network services, applications, and application categories. You can allow or deny access to any the following destinations based on your requirements. l to all destinations- Access is allowed or denied to all destinations. l to a particular server-Access is allowed or denied to a particular server. After selecting this option, specify the IP address of the destination server. l except to a particular server-Access is allowed or denied to servers other than the specified server. After selecting this option, specify the IP address of the destination server. l to a network-Access is allowed or denied to a network. After selecting this option, specify the IP address and netmask for the destination network. l except to a network-Access is allowed or denied to networks other than the specified network. After selecting this option, specify the IP address and netmask of the destination network. l to domain name-Access is allowed or denied to the specified domains. After selecting this option, specify the domain name in the Domain Name text box. l to master IP-Access is allowed or denied to the master IP address. Log Select this checkbox to create a log entry when this rule is triggered. Instant supports firewall based logging function. Firewall logs on the W-IAPs are generated as security logs. Blacklist Select the Blacklist checkbox to blacklist the client when this rule is triggered. The blacklisting lasts for the duration specified as Auth failure blacklist time on the Blacklisting tab of the Security window. For more information, see Blacklisting Clients on page 183. Disable scanning Select Disable scanning checkbox to disable ARM scanning when this rule is triggered. The selection of the Disable scanning applies only if ARM scanning is enabled, For more information, see Configuring Radio Settings on page 257. DSCP tag Select the DSCP tag checkbox to specify a DSCP value to prioritize traffic when this rule is triggered. Specify a value within the range of 0 to 63. To assign a higher priority, specify a higher value. 802.1p priority Select the 802.1p priority checkbox to specify an 802.1p priority. Specify a value between 0 and 7. To assign a higher priority, specify a higher value. 3. Click OK and then click Finish. In the CLI To configure access rules: (Instant AP)(config)# wlan access-rule Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide Deep Packet Inspection and Application Visibility | 268
![](/manual_guide/products/dell-wseries-207-instant-643142-user-guide-20bbb33/268.png)