Dell W-Series 207 Instant 6.4.3.1-4.2 User Guide - Page 390
AP Configuration, Distributed L3 profile with VLAN 30
View all Dell W-Series 207 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
l 10.40.0.0/16 subnet is reserved for L3 mode -used by Contractor SSID. l 172.16.20.0/24 subnet is used for NAT mode - used for wired network. l Client count in each branch is 200. l Contractors are only permitted to reach 10.16.0.0/16 network. AP Configuration This section provides information on configuration steps performed through the CLI or the UI. Table 77: W-IAP Configuration for Scenario 3-IPSec: Multiple Datacenter Deployment Configuration Steps CLI Commands 1. Configure the primary IP address. This IP address is the Public IP address of the controller. Fast failover is enabled for fast convergence. (ap)(config)# vpn primary (ap)(config)# vpn backup (ap)(config)# vpn preemption (ap)(config)# vpn fast-failover UI Procedure See Configuring an IPSec Tunnel 2. Configure routing profiles to tunnel traffic through IPSec. (ap)(config)# routing-profile (ap)(routing-profile)# route 0.0.0.0 0.0.0.0 (ap)(routing-profile)# route 10.0.0.0 255.0.0.0 See Configuring Routing Profiles 3. Configure Enterprise DNS for split DNS. The example in the next column uses a specific enterprise domain to tunnel all DNS queries matching that domain to corporate. (ap)(config)# internal-domains (ap)(domains)# domain-name corpdomain.com See Configuring Enterprise Domains 4. Configure distributed L3 DHCP profiles with VLAN 30 and 40. Distributed L3 profile with VLAN 30 (ap)(config)# ip dhcp l3-dhcp (ap)(DHCP profile "l3-dhcp")# server-type Distributed,L3 (ap)(DHCP profile "l3-dhcp")# server-vlan 30 (ap)(DHCP profile "l3-dhcp")# ip-range 10.30.0.0 10.30.255.255 (ap)(DHCP profile "l3-dhcp")# dns-server 10.1.1.50,10.1.1.30 (ap)(DHCP profile "l3-dhcp")# domain-name corpdomain.com (ap)(DHCP profile "l3-dhcp")# client-count 200 Distributed L3 profile with VLAN 40 (ap)(config)# ip dhcp l3-dhcp (ap)(DHCP profile "l3-dhcp")# server-type Distributed,L3 (ap)(DHCP profile "l3-dhcp")# server-vlan 40 (ap)(DHCP profile "l3-dhcp")# ip-range 10.40.0.0 10.40.255.255 (ap)(DHCP profile "l3-dhcp")# dns-server 10.1.1.50,10.1.1.30 (ap)(DHCP profile "l3-dhcp")# domain-name corpdomain.com See Configuring Distributed DHCP Scopes and Configuring Local DHCP Scopes Dell Networking W-Series Instant 6.4.3.1-4.2.0.0 | User Guide IAP-VPN Deployment Scenarios | 390