Dell Wyse 3020 Wyse ThinOS Version 8.4 Release Notes - Page 21

Reference [Display = {yes, no}] CCMEnable = {yes, no} [IgnoreMqtt = (yes, no)] [CCMServer=server_address[:port]] WDAService= yes [interval = {0-65535}] [disableNotice={yes, no}] [disableCancel={yes, no}] [noticeTime={0-255}] ScreenSaver=value Description Display-If set to yes, the username field in sign-on window will be displayed. By default the value is set to no and the field will be obscured with asterisks (*). CCMEnable - Yes/no option to enable the Cloud Client Manager Agent. It specifies an IP address or URL address for the CCM server. Default port is 80. Once specified, it is saved in the nonvolatile memory. IgnoreMqtt-If IgnoreMqtt=yes is specified, CCM agent will not connect to MQTT server. Default value is no. CCMServer - Specifies an IP address or URL address for the CCM server. Default protocol is HTTPS if "http://" or "https://" is not available. Default port is 443. Once specified, it is saved in the non-volatile memory. Example: CCMEnable=yes CCMServer=http://xxx:8080 WDA Service always runs in the background. If priority is available, WDA discovers the protocol according to it. interval-If interval is available, WDA rediscovery delay after a failed check-in (both CCM and WDM failed) is changed to interval minutes. The default value is 0. (WDA rediscovery delay is 24 hours). For example, if you set WDAService=yes interval=30, WDA rediscovery delay is set as 30 minutes. disableNotice-If option is set to yes, then count down prompt will not show when configuration from WDM is received. The default value is no. disableCancel-If option is set to yes, there is no possibility to cancel count down prompt for WDM (device is going to reboot). noticeTime-If noticeTime is available, the time of countdown prompt is changed to seconds. Default value is 20. For example: WDAService=yes disableNotice=no disableCancel=yes noticeTime=0. In this scenario, count down prompt is displayed if WDM configuration is received, but you are not allowed to cancel system reboot, and amount time of count down prompt is set to default value (20 seconds). Value 0 1 3 5 10 15 Delay Before Starting Disabled 1 Minute 3 Minutes 5 Minutes 10 Minutes 15 Minutes Dell Wyse ThinOS Version 8.4 21 Release Notes