Dell Wyse 3020 Wyse ThinOS Version 8.4 Release Notes - Page 23

Reference DHCPOptionsRemap={yes, no} [WDMServer={128-254}] [WDMSecurePort={128-254}] [WDMFQDN={128-254}] [CCMGroupKey={128-254}] [CCMServer={128-254}] [CCMMQTTServer={128-254}] [CCMCAValidation[]={128-254}] DNSIPVersion={ipv4, ipv6} [Combined={yes, no}] Dualhead={yes, no} [EnsureDpIsOn ={yes, no}] CaradigmServer=vip list [DisableManualLogon=yes, no] INACTIVE=minutes [LockTimer=seconds] OneSignServer=onesign_server [AutoAccess={VMW, XD, XA, LOCAL, RDSHD, RDSHA, RDSHPC}] Description DisableShowDisclaimer-The option is set to yes to disable popup/pre-logon message and automatically accept them without intervention when broker type is VMware View. The default value is no. DisableShowServer-The option is set to yes to disable showing the view server URL in sign-on window and disclaimer window when broker type is VMware View. The default value is no. If DHCPOptionsRemap=yes, the following parameters can be set. The options value must be between 128 and 254. Each value must be different. These options are used to configure DHCP server tags for WTOS booting. WDMServer (186) specifies ip address of WDM server. WDMServer (192) specifies HTTP port of WDM server. WDMSecurePort (190) specifies HTTPS port of WDM server. WDMFQDN (194) specifies the FQDN of WDM server. CCMGroupKey (199), CCMServer (165), CCMMQTTServer (166) and CCMCAValidation (167) specify to remap the tags for CCM configuration. Specify the DNS server and domain. Default IP version is ipv4. Combined-If option is set to yes, the DNS server will combine the DNS server configured by DHCP and the static one, the DNS domain will use the value configured by DHCP in case of static DNS domain is empty. For V-class, C-class, R-class, D-class and X10J/T-class, set to yes to support dual-monitor. EnsureDpIsOn-The optional keyword is only used for D-class. When EnsureDpIsOn is set to yes, D-class will halt at boot time until DP monitor is plugged in. A list of VIP addresses with optional TCP port number of Caradigm servers. DisableManualLogon-The option is set to yes to disable user to manually enter credentials to authenticate into the device. It only allows an already enrolled proximity badge and in active grace period to authenticate with a single badge tap. The default value is no. LockTimer-If the option is set, then the terminal is locked and the system idle is timeout in the configured seconds; System will automatically sign off, reboot or shutdown based on the setting of AutoSignoff. A list of host names or IP addresses with optional TCP port number or URLs of Imprivata OneSign servers. It should use https protocol. If OneSignServer="" is defined, then only Imprivata virtual channel can work. From ThinOS version 8.3_109, ThinOS supports OneSign 5.2 RDSH broker. Set AutoAccess=RDSHD or RDSHA to auto Dell Wyse ThinOS Version 8.4 23 Release Notes