Dell XPS 13 7390 Service Manual - Page 23
Removing the solid-state drive, Prerequisites, Procedure to remove M.2 2280 solid-state drive
View all Dell XPS 13 7390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
10 Removing the solid-state drive NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. CAUTION: Solid-state drives are fragile. Exercise care when handling the solid-state drive. CAUTION: To avoid data loss, do not remove the solid-state drive while the computer is in sleep or on state. Topics: • Prerequisites • Procedure to remove M.2 2280 solid-state drive Prerequisites 1. Remove the base cover. 2. Remove the battery. Procedure to remove M.2 2280 solid-state drive 1. Remove the screw (M2x3) that secures the solid-state drive shield and the solid-state drive to the system board. 2. Slide and remove the solid-state drive shield from the solid state drive slot. 3. Lift the solid-state drive at an angle, then slide and remove the solid-state drive from the solid-state drive slot. NOTE: The 2280 solid-state drive has a unique thermal plate and cannot be interchanged with the 2230 solid-state drive thermal plate. Removing the solid-state drive 23