Dell XPS 13 7390 Service Manual - Page 39
Replacing the display assembly, Procedure
![]() |
View all Dell XPS 13 7390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
21 Replacing the display assembly NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance. Topics: • Procedure • Post-requisites Procedure 1. Slide the palm-rest assembly under the hinges of the display assembly. 2. Using the alignment posts, press the display hinges down on the palm-rest assembly, aligning the screw holes on the display hinges with the screw holes on the palm-rest assembly. 3. Connect the antenna cables to the system board. The following table provides the antenna cable color schemes for the wireless card supported by your computer. Table 2. Antenna-cable color scheme Connectors on the wireless card Antenna-cable color Main (white triangle) White Auxiliary (black triangle) Black Replacing the display assembly 39
![](/manual_guide/products/dell-xps-13-7390-service-manual-f84afb7/39.png)