Dell XPS 13 7390 Service Manual - Page 52
Post-requisites, Entering the Service Tag in the BIOS setup program
View all Dell XPS 13 7390 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
8. Connect the fingerprint-reader cable to the system board and close the latch to secure the cable. Skip this step if the power button does not have the fingerprint reader. 9. Connect the speaker cable to the system board. 10. Connect the headset-port cable to the system board. 11. Connect the antenna cables to the system board. The following table provides the antenna cable color schemes for the wireless card supported by your computer. Table 3. Antenna-cable color scheme Connectors on the wireless card Antenna-cable color Main (white triangle) White Auxiliary (black triangle) Black Post-requisites 1. Replace the fans. 2. Replace the heat sink. 3. Replace the solid-state drive. 4. Replace the battery. 5. Replace the base cover. Entering the Service Tag in the BIOS setup program 1. Turn on or restart your computer. 2. Press F2 when the Dell logo is displayed to enter the BIOS setup program. 3. Navigate to the Main tab and enter the Service Tag in the Service Tag Input field. 52 Replacing the system board