Dell XPS 13 9305 Service Manual - Page 15
Removing the base cover, Procedure, To avoid causing damage to the computer
View all Dell XPS 13 9305 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
4 Removing the base cover NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure CAUTION: To avoid causing damage to the computer, do not pry the base cover from the rear near the hinges. 1. Remove the eight screws (M2x3, Torx) that secure the base cover to the palm-rest assembly. 2. With the computer face-down, open the computer at an angle. 3. Using a plastic scribe, pry the base cover from the palm-rest assembly starting from the front left and right corner. Removing the base cover 15