Home » Dell Manuals » Laptops » Dell XPS 13 9305 » Manual Viewer

Dell XPS 13 9305 Service Manual - Page 42

Replacing the display assembly

Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

4. Replace the four screws (M2.5x4) securing the display hinges to the palm-rest assembly and connect the camera cable to the system board, adhering the tape securing the camera cable to the fans. 5. Align the screw hole on the wireless antenna and camera cable bracket to screw hole on the system board. 6. Replace the screw (M1.6x3) that secures the wireless antenna and camera cable bracket to the system board. 7. Connect the display cable to the system board. 8. Align the screw holes on the display-cable bracket with the screw holes on the system board. 9. Replace the two screws (M1.6x2.5) that secure the display-cable bracket to system board. Post-requisites 1. Replace the battery. 2. Replace the base cover. 42 Replacing the display assembly

Section	Page
XPS 13 9305 Service Manual	3
Before working inside your computer	7
Before you begin	7
Safety instructions	7
Electrostatic discharge—ESD protection	8
ESD field service kit	8
After working inside your computer	9
Removing and installing components	10
Recommended tools	10
Screw list	10
Major components of XPS 13 9305	11
Replacing the base cover	13
Procedure	13
Removing the base cover	15
Procedure	15
Removing the battery	17
Lithium-ion battery precautions	17
Prerequisites	17
Procedure	17
Replacing the battery	19
Lithium-ion battery precautions	19
Procedure	19
Post-requisites	20
Removing the solid-state drive	21
Prerequisites	21
Procedure to remove M.2 2280 and M.2 2230 solid-state drives	21
Procedure to remove M.2 2280 solid-state drive	21
Procedure to remove M.2 2230 solid-state drive	22
Replacing the solid-state drive	23
Procedure to replace M.2 2280 and M.2 2230 solid-state drives	23
Procedure to replace 2280 solid-state drive	23
Procedure to replace 2230 solid-state drive	23
Post-requisites	24
Removing the speakers	25
Prerequisites	25
Procedure	25
Replacing the speakers	26
Procedure	26
Post-requisites	26
Removing the coin-cell battery	27
Prerequisites	27
Procedure	27
Replacing the coin-cell battery	28
Procedure	28
Post-requisites	28
Removing the heat sink	29
Prerequisites	29
Procedure	29
Replacing the heat sink	30
Procedure	30
Post-requisites	30
Removing the fans	31
Prerequisites	31
Procedure	31
Replacing the fans	33
Procedure	33
Post-requisites	34
Removing the heat-sink assembly	35
Prerequisites	35
Procedure	35
Replacing the heat-sink assembly	37
Procedure	37
Post-requisites	38
Removing the display assembly	39
Prerequisites	39
Procedure	39
Replacing the display assembly	41
Procedure	41
Post-requisites	42
Removing the headset port	43
Prerequisites	43
Procedure	43
Replacing the headset port	45
Procedure	45
Post-requisites	46
Removing the fans	47
Prerequisites	47
Procedure	47
Replacing the fans	49
Procedure	49
Post-requisites	50
Removing the system board	51
Prerequisites	51
Procedure	51
Replacing the system board	53
Procedure	53
Post-requisites	54
Entering the Service Tag in the BIOS setup program	54
Removing the power button with fingerprint reader	55
Prerequisites	55
Procedure	55
Replacing the power button with fingerprint reader	56
Procedure	56
Post-requisites	56
Removing the keyboard	57
Prerequisites	57
Procedure	57
Replacing the keyboard	58
Procedure	58
Post-requisites	58
Removing the palm-rest assembly	59
Prerequisites	59
Procedure	59
Replacing the palm-rest assembly	60
Procedure	60
Post-requisites	60
Drivers and downloads	61
System setup	62
Entering BIOS setup program	62
Navigation keys	62
Boot Sequence	62
One time boot menu	63
System setup options	63
Clearing CMOS settings	73
Clearing BIOS (System Setup) and System passwords	74
Troubleshooting	75
SupportAssist diagnostics	75
System-diagnostic lights	75
Recovering the operating system	76
Flashing the BIOS	76
Flashing BIOS (USB key)	77
Backup media and recovery options	77
Drain residual flea power (perform hard reset)	77
WiFi power cycle	77

Match case Limit results 1 per page

Replace the four screws (M2.5x4) securing the display hinges to the palm-rest assembly and connect the camera cable to

the system board, adhering the tape securing the camera cable to the fans.

Align the screw hole on the wireless antenna and camera cable bracket to screw hole on the system board.

Replace the screw (M1.6x3) that secures the wireless antenna and camera cable bracket to the system board.

Connect the display cable to the system board.

Align the screw holes on the display-cable bracket with the screw holes on the system board.

Replace the two screws (M1.6x2.5) that secure the display-cable bracket to system board.

Post-requisites

Replace the

battery

Replace the

base cover

Replacing the display assembly