Dell XPS 13 9360 XPS 13 Service Manual - Page 107
Clearing CMOS settings, Clearing BIOS (System Setup) and System passwords, Enter or Tab.
View all Dell XPS 13 9360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
To enter the System Setup, press F2 immediately after a power-on or reboot. 1 In the System BIOS or System Setup screen, select System Security and press Enter. The System Security screen is displayed. 2 In the System Security screen, verify that Password Status is Unlocked. 3 Select System Password, alter or delete the existing system password and press Enter or Tab. 4 Select Setup Password, alter or delete the existing setup password and press Enter or Tab. NOTE: If you change the System and/or Setup password, re-enter the new password when prompted. If you delete the System and/or Setup password, confirm the deletion when prompted. 5 Press Esc and a message prompts you to save the changes. 6 Press Y to save the changes and exit from System Setup. The computer reboot. Clearing CMOS settings 1 Remove the base cover. 2 Remove the battery. 3 Remove the coin-cell battery. 4 Wait for one minute. 5 Replace the coin-cell battery. 6 Replace the battery. 7 Replace the base cover. Clearing BIOS (System Setup) and System passwords Contact Dell technical support to clear the forgotten passwords. For more information, see www.dell.com/contactdell. 107