Dell XPS 13 9360 XPS 13 Service Manual - Page 42
Replacing the battery-status light cable with microphones, Procedure, Post-requisites
![]() |
View all Dell XPS 13 9360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Replacing the battery-status light cable with microphones WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. NOTE: The battery-status light cable with microphones is an assembly that includes LED indicators and digital-array microphones. Procedure 1 Using the alignment posts, place the battery-status light cable with microphones on the palm-rest assembly. 2 Route the battery-status light cable with microphones through the routing guides and adhere it to the palm-rest assembly. 3 Adhere the tape that secures the battery-status light cable with microphones to the palm-rest assembly. 4 Slide the battery-status light cable with microphones into the connector on the keyboard-controller board and close the latch to secure the cable. 5 Adhere the tape that secures the battery-status light cable to the keyboardcontroller board. Post-requisites 1 Replace the battery. 2 Replace the base cover. 42
![](/manual_guide/products/dell-xps-13-9360-xps-13-service-manual-8be871d/42.png)