Dell XPS 13 9360 XPS 13 Service Manual - Page 53
Replacing the I/O board, Procedure, Post-requisites
![]() |
View all Dell XPS 13 9360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Replacing the I/O board WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before working inside your computer. After working inside your computer, follow the instructions in After working inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/ regulatory_compliance. Procedure 1 Slide the I/O board at an angle and then align the screw holes on the I/O board with the screw holes on the palm-rest assembly. 2 Adhere the tape that secures the I/O board. 3 Align the screw hole on the display cable with the screw hole on the I/O board. 4 Replace the two screws (M1.6x3) that secure the I/O board to the palm-rest assembly. 5 Slide the I/O-board cable into the I/O board and close the latch to secure the cable. 6 Slide the fingerprint-reader cable (optional) into the I/O board and close the latch to secure the cable. 7 Connect the media-card reader cable to the connector on the I/O board. 8 Adhere the tape that secures the display cable to the I/O board. Post-requisites 1 Replace the battery. 2 Replace the base cover. 53
![](/manual_guide/products/dell-xps-13-9360-xps-13-service-manual-8be871d/53.png)